PRODUCT

Waveguide Twist

Zysen provide twist waveguide from WR975 to WR3, Flange is compatible with EIA and IEC standards. Material is Aluminum(6061) and Brass, Surface treatment include silver plating, gold plating, nickel plating, passivization, conductive oxidation etc. length, flange, material, surface treatment all are customization.

Waveguide	P/N	Frequency Range (GHz)	VSWR	Length (mm)	Angle(°)
WR430	430TW-500A-FF	1.70-2.60	1.1	500	90/60/45/30
WR340	340TW-500A-FF	2.20-3.30	1.1	500	90/60/45/30
WR284	284TW-300A-FF	2.60-3.95	1.1	300	90/60/45/30
WR229	22T9W-200A-FF	3.30-4.90	1.1	200	90/60/45/30
WR187	187TW-200A-FF	3.95-5.85	1.1	200	90/60/45/30
WR159	159TW-200A-FF	4.90-7.05	1.1	200	90/60/45/30
WR137	137TW-100A-FF	5.85-8.20	1.1	100	90/60/45/30
WR112	112TW-100A-FF	7.05-10.0	1.1	100	90/60/45/30
WR90	90TW-100A-FF	8.20-12.4	1.1	100	90/60/45/30
WR75	75TW-100A-FF	10.0-15.0	1.1	100	90/60/45/30
WR62	62TW-80A-FF	12.4-18.0	1.1	80	90/60/45/30
WR51	51TW-50A-FF	15.0-22.0	1.1	50	90/60/45/30
WR42	42TW-50A-FF	18.0-26.5	1.1	50	90/60/45/30
WR34	34TW-50B-FF	22.0-33.0	1.1	50	90/60/45/30
WR28	28TW-50B-FF	26.5-40.0	1.1	50	90/60/45/30
WR22	22TW-50B-FF	33.0-50.0	1.1	50	90/60/45/30
WR19	19TW-50B-FF	40.0-60.0	1.1	50	90/60/45/30
WR15	15TW-50B-FF	50.0-75.0	1.1	50	90/60/45/30
WR12	12TW-25B-FF	60.0-90.0	1.1	25	90/60/45/30
WR10	10TW-25B-FF	75.0-110.0	1.1	25	90/60/45/30
WR8	8TW-25B-FF	92.2-140	1.15	25	90/60/45/30
WR6	6TW-25B-FF	113-173	1.15	25	90/60/45/30
WR5	5TW-25B-FF	145-220	1.15	25	90/60/45/30
WR4	4TW-25B-FF	172-261	1.15	25	90/60/45/30
WR3	3TW-25B-FF	217-330	1.15	25	90/60/45/30

Ordering Information	WR	Mod	-L	Material	-F1	F2
Example part number:	112	TW	-100	B	-F	F
WG Size:WR10 to WR430			Length in mm	A=Aluminum, B=Copper/Brass	F=Cover/Flat G=Groove C=Choke	F=Cover/Flat G=Groove C=Choke
Example P/N:112TW-100B-FF is WR112 Twist waveguide,100mm length, Brass material with cover flanges The Standard Model Numbers above are the most common parts ordered for size, material and flange. However, these models can easily be altered to accommodate your needs by using the Model # code system to the left.